


Realistic physical slurry pipe system for Farming Simulator 2025. The system replaces the vanilla fill-trigger mechanics with physical connections, PTO-driven pumping, pressure control, and slurry that can thicken, crust, and block if neglected.
It supports tanker fill arms, pipe chains, direct connecting pipes, pumps, couplers, valves, multiple fill types, water intake, spreading, and liquid fertiliser or herbicide transfer.
Features
- Plumbing and transfer: Fill arms can be swung out of the tanker by joystick into open slurry pits or rubber boot ports on buildings and other vehicles.
- Pipe chains are multi-segment pipes laid by walking from one coupler toward another, then locked into place when both ends overlap valid couplings.
- Direct bez pipes are single connecting pipes between two nearby couplers for quick pump transfers between a tanker and a building.
- The conduit pump, also called the PTO Slurry Pump, is a passive pump trailer that lets two pipe chains transfer through it.
- Animated couplers and valves have clamp handles that close on connection, while valve wheels rotate when opened.
- Pipe segments can be assigned colours from a palette, with the colours stored per save.
- Multi-fill-type support works with LIQUIDMANURE and DIGESTATE. Transfers automatically use whichever fill type is present.
- Pumps and pressure: Pump types include vacuum with stored ±bar pressure and a gauge, HVP high-volume pump, conduit pump station, and openTop passive vessels such as nurse tanks.
- Vacuum tankers build, hold, taper, and purge a stored charge that drives filling and discharge. Spreading behaviour scales with pressure rather than a simple on/off state.
- The opt-in PTO shear bolt wears and snaps under load while the PTO is engaged. It can be repaired by walking up and holding the repair control.
- Slurry behaviour: Slurry thickens as dry matter concentrates. Thickness affects flow and spreading.
- An unmixed store crusts over the season. Crusted, lumpy slurry can block spreader outlets and the macerator. Mixing clears the risk, while adding water dilutes thick slurry.
- A manager-driven agitator works on any registered vehicle with an agitator tip node and does not require a specialization.
- Fill arms can draw water directly from map lakes and ponds wherever the map provides SPS water planes.
- Spreading: Dribble bars and band spreaders include per-outlet blockage modelling, a distributor macerator, and a spreader HUD.
- Fertiliser and herbicide sprayers can be loaded through the same coupler-and-pipe system using a dedicated sprayer integration operated from a single walk-up pump control. Sprayers have no pressure model, and their flow is a flat rate.
Changelog
- V1.0.2.0
- Newly added pressure and vacuum: Vacuum tankers maintain their vacuum, and the liquid flow follows it; suction operations via high-performance pump lines, back pressure during application, and the suction of slurry from a pit using a free hose or pipe end.
- Pressure gauges on the Supercis 800 and Kaweco Profi 2 models.
- Chemical mixing and cleaning: Concentrates are mixed with water in the sprayer; the concentration is maintained throughout the entire system, including tanks and lines, until application in the field.
- A multi-stage cleaning process for soiled sprayers and a portable cleaning station are also available.
- New SPS vehicles: MKS 8 Dual Tank, 550 Water/Chem Bowser, Supercis 800, Kotte FRC 65, Amazone UX5201 Super.
- Water and suction baskets: A hose or pipe end submerged in a lake, river, pond, or waterway will only draw water through a suitable basket. Small baskets are for water and milk, while large ones are for slurry. These baskets can be carried on the vehicle using the designated holder.
- Leakage and contamination from lines: Open hose or pipe ends lying on the ground can leak fluid and form puddles.
- Uniform standards for reach and coupling radius for all connections.
- Settings menu: All PLC options are centrally located in one place.
- New manual:
SPS_README_08_New_in_1.0.2.0.md. - Fixed bugs:
- The spray pattern on the cleaning device, or washout boom, is now displayed correctly even when using Soil & Fertilizer chemicals.
- Soil & Fertilizer IBC containers can once again be connected to water lines and spray hoses.
- It is now possible again to pick up a suction strainer or a stowed hose at the connection point of the MKS 8.
- Couplings on tank openings can also be used in physical pipe mode.
- The handle on the cleaning station now correctly follows the valve, even when no hose is connected.
- V1.0.1.9
- Corrections to the physical hose system for multiplayer mode, reported and retested by server players.
- The invisible hoses of the original hose system have been repaired.
- Fertilizer and pesticides can now be routed through the water hose.
- There have also been revisions to the Borger 125 Separator.
- No configuration changes are required. Existing save games can be used unchanged.
- New fertilizer and plant protection product support via the water hose in the physical hose system: The 80 mm water hose can now be connected to field sprayers, fertilizer and plant protection product silos, IBC containers, and purchasing stations.
- The buttons on the respective sprayer are used for this:
Bstarts or stops the flow, andYswitches between loading and unloading. The cover must be opened beforehand withX. - The milk hose remains exclusively for milk.
- Borger 125 Separator: Information box with details on separated slurry in kg/t, source, return flow, status, inflow rate, and solids content; real-time display on the control panel; solids visibly fall from the discharge chute; during use, soiling, wear, and moss growth occur; a wrench symbol appears on the switch.
- Any crust that forms dissolves when fresh slurry is pumped into the storage tank.
- The tower mixer is now available in the shop.
- Clean Log: Messages about hose connections now only appear when spsDebug Info is enabled.
- Fixed bugs in multiplayer on a dedicated server:
- Manually picking up items by teammates did not work or resulted in the item being immediately dropped again.
- Hoses could only be grabbed at their female connector; female/female or male/male connections could not be picked up.
- Dropped hoses remained suspended in mid-air for teammates.
- Hoses that were already connected or stowed before a player joined appeared in a loose position.
- Physical Hose System: Tank trucks rotated uncontrollably if a hose was connected to the rear connector, for example, Kotte TSA.
- No prompt to disconnect appeared at a connected hose end.
- After reloading a save, connected hoses would detach, and a stretched hose would remain visible at the connector.
- A laid-out hose would disappear with a slight camera movement.
- It is no longer possible to connect a hose to both ports of the same machine.
- Original hose system: The automatic hose connection between two ports was not graphically displayed in version 1.0.1.8. The connection functioned, but was not visually apparent.
- For hoses used with sprayers, water, or milk that are stored at a length of more than 4 meters, the connection prompt now only appears when you are within range. Park closer to ensure the hose remains connected.
- Separator Source empty when the storage is full: fixed.
- Note: On dedicated servers, the piping mode prompt does not appear at startup. An administrator can configure the physical piping in the PLC settings instead.
- V1.0.1.8
- Description: Physical hoses, PLC docking station, PLC tower mixer, and numerous troubleshooting tasks.
- Newly added physical hoses: Hoses can be purchased, carried, connected, and manually connected to each other as an alternative to permanently installed lines.
- A dedicated shop page is available for each hose type: slurry, water, and milk; 4 m or 6 m lengths; various connectors; and colours.
- To release stuck hoses, hold a hose and use left Alt + F. The hose can be moved through vehicles until released.
- Hose holders are available on tank trucks and the SPS docking station, which is a mobile connection point.
- SPS tower mixer: A slurry lagoon agitator with an integrated pump for filling tank trucks.
- Flow indicators for pumps, including the PTO pump and tower mixer, include an indication of the reasons for pump stoppages. The flow rate is also displayed in the tank truck’s HUD.
- Water and milk can be transported via hoses, including connections with valves, gravity flow, and transfer between tank trucks.
- Support is provided for the central cow barn, SPS, as well as for fertilizer and herbicide silos.
- Hoses, docking station, PTO pump, and tower mixer are subject to dirt and wear and can be cleaned with a pressure washer.
- Custom waterways can be drawn in the build menu.
- Multiplayer bug fixes: Synchronization of valves, pumps, and connections; joining players receive the correct status; PLC settings can only be changed by an administrator; other farms cannot operate your equipment.
- Shear bolt status is saved.
- The floating layer in slurry lagoons is now synchronized per lagoon.
- Gea/Vector cow barns use their own configuration.
- A hose holder was added for the Farmtech SuperCis 800.
- Shop: Slurry Technology category, PLC Slurry Set, cameras, and hose previews.
- Changes: More organized log, with routine messages moved to the Info debug channel; download size reduced by approximately 50 MB; lower processing load per frame.




