This pack includes Reinke linear irrigation systems for flat, obstacle-free terrain, with widths from 37 meters to 223 meters. It also includes a 228-meter pipe, a 50-meter pipe extension, a pipe tool, and a Reinke irrigation unit equipped with a control panel.
Features
- Reinke linear irrigation systems can be placed under the placeables menu.
- Use the systems only on flat, clear land; do not use them on hilly or sloped ground.
- Ensure there are no trees, utility poles, or other obstacles in the field that the machine could collide with during operation.
- When placing the main 228-meter pipe and hydrant, expect a delay of about 6 seconds for it to spawn.
- The game may log a warning for these components, but this is normal and does not affect gameplay; everything is 100% functional.
- If the default 228-meter pipe and hydrant setup is not long enough, extend it with 50-meter pipe add-ons.
- The pipes can be towed with a tractor via the 3-point hitch.
- For handling and connecting pipes, use the Easy Development Control mod with “Super Strength” turned on.
- Connect the pipes to the Reinke by pressing the
Qkey. - A pipe wrench tool is included. Clicking a single pipe piece with it instantly deletes the entire connected pipe network.
- Open the water valve using the Interactive Control mod before entering the Reinke.
- Press the
Gkey to switch into vehicle control mode so Interactive Control inputs take effect. - Set Automatic Motor Start to No (disabled).
- Turn on the Reinke using the Key icon.
- The Interactive Control panel activates spraying / irrigation, beacon lights, the engine, and the GPS-like alignment corrector.
- The GPS-like alignment corrector aligns the machine straight based on the set angle once cruise control is engaged.
- When the Reinke finishes its run, turn off only the engine first. This instantly engages the brakes and holds it securely in place.
- If cruise control/GPS is turned off before the engine, the machine will roll backward for a short distance. Always shut down the engine first to park it properly.
Specifications
- Available widths: 37 meters, 75 meters, 115 meters, and 223 meters.
- Main pipe and hydrant: 228 meters.
- Pipe extension: 50 meters.
- The 37-meter model is the affordable entry model.
- Realistic prices.
Compatible with:
Changelog
- V1.1.0.0
- Pump and hose compatibility has been removed.
- Only my own piping system and equipment are used.
- A control panel has been installed on the Reinke irrigation system, specifically the model with 1, 2, 3, and 6 spans. It is located on the right-hand side relative to the direction of travel.
- Realistic prices have been set.
- With the wrench, which is actually a hose tool, a left-click on the pipe deletes the entire connected piping system in a single click.
- The valve must be opened using the Interactive Control to operate the Reinke system; therefore, Interactive Control is required.
- With Easy Developer Control enabled, the pipes can easily be dragged around.
- V1.0.0.3
- Supported pumps and hoses.
- Irrelevant scripts have been deleted.
- V1.0.0.2
- Category name fix.
- Already specialization name error fix.
