Real Power Train V1.5.1.0

FS25 Mods |
Real Power Train V1.5.1.0


Real Power Train adds realistic CVT and transmission management, including brand-specific transmission profiles, hand-throttle control, power-split efficiency, engine load behavior, hydraulic effects and multiplayer support.

Features

  • Realistic CVT per brand: Fendt Vario and MF Dyna-VT with 2 manual ranges, field and road, changed only at standstill; CVXDrive, Case IH, Steyr and New Holland, JD AutoPowr, CLAAS CMATIC, Deutz TTV, Valtra Direct and Kubota KVT with 4 automatic ranges and almost unnoticeable shifts.
  • Engine and transmission management: Auto, with economy and low rpm at transport speed, or Power, with load limit and acceleration ramps 1-4.
  • Hand throttle with two rpm memories, A and B, saved with the savegame, like real tractors.
  • Power-split efficiency: more losses in the hydrostatic part, which shows in pulling force and fuel use.
  • Engine under load: with the PTO working, the engine drops a little instead of being locked at PTO rpm.
  • Hydraulics raise the engine rpm for tipping, loader, linkage and folding, then return to idle afterwards.
  • Own window, Left Alt + P: Transmission tab with live rpm and target, engine load, efficiency, hydrostatic share and a range strip; Settings tab with modules, which vehicles, CVT profile per brand and settings applied at once; Panel tab with on or off, text size and mouse movement.
  • The CVT module turns itself off if CVT Addon, RealismAddon Gearbox or VCA is active.
  • Zasty HUD shows the range and the hand throttle; the panel hides when the HUD is active.
  • Multiplayer supported.

Keys

  • Left Alt + P: Real Powertrain window
  • Left Alt + Up / Down arrow: Hand throttle, hold

These are the default keys. If one of them is already used by the game or by another mod, go to Options > Controls and set the key you prefer to avoid conflicts.

Changelog

  • V1.5.1.0
    New: inching pedal for CVT tractors. It works like the left “clutch” pedal of a real CVT tractor. Default key: Space. You can change it in Controls under “Inching (CVT clutch pedal)”. Hold the key: the wheels slow down smoothly and stop. Release it: drive comes back smoothly, with no jerk. Short taps creep the tractor forward a little at a time. Only the wheel drive is cut. Engine rpm, PTO and hydraulics keep running. For example, a baler keeps tying the bale while the tractor stands still. Inching overrides the accelerator and keeps speed and cruise control. It is useful for balers, front loaders, creeping up to a pallet and headland turns. The HUD shows an INCH % chip while it is active. Fixes: New Holland tractors now use their own transmission, Auto Command. They used to show Case IH’s CVXDrive. Long texts cut with “..” no longer break accented letters.
  • V1.4.0.0
    New: PTO by hand throttle. Turning on a PTO implement no longer locks the engine at PTO rpm. The engine stays at idle or at your hand throttle, and you set the rpm yourself with the hand throttle or the A/B memories. Standard PTO, 540/1000, needs about 85-95% of the tractor’s max rpm. Eco PTO, 540E/1000E, about 70-75%, is used automatically for tedders, rakes and spreaders. Rotors and PTO shafts turn with the engine rpm. Below about 78% of the PTO rpm, the implement works slower and a “Low PTO rpm” warning shows. The panel shows a PTO % chip. It is on by default in Realistic mode and off in Arcade. It also has its own switch in Settings, Left Alt + P. The AI helper keeps the game’s normal behaviour. Compatibility with Real Vehicle Dynamics: keep speed and the game’s cruise control hold the speed again with both mods active.
  • V1.3.1.0
    New: hydrostatic transmission. Combines, forage harvesters, telehandlers and other non-tractor machines with a continuous transmission are now recognised as hydrostatic, with gears 1-4 changed at standstill instead of using a tractor CVT profile.
  • Fixed: CVT oil temperature no longer drops below about 40 °C with the engine running. The oil cooler thermostat is now simulated, closed up to 42 °C and fully open at 60 °C.
  • The “cold oil” warning now comes on below 40 °C.

Author: zasty chalk, ryankd233, Chronak28
Having problems with the mod? Check the comments for possible solutions, and report any new bugs you discover.


Download


Useful Information: How to install FS25 Mods | Farming Simulator 25 FAQ | Farming Simulator 25 News | FS25 System Requirements | Download FS25 Game | Giants Editor FS25 | FS25 Modding Guide | FS25 Cheats | FS25 Guides

Leave a Reply

Your email address will not be published. Required fields are marked *