Fluid System V1.2.0.0

Hands-on liquid handling for Farming Simulator 25. Lay out hoses, open the valves and start the pump to move water, slurry, digestate and other liquids between tanks, vehicles and storage.

Features

• Real hose connections: couple hoses by hand, join them for longer routes and store them on equipped vehicles.
• Pumps and valves you operate yourself: PTO rotary-lobe pumps, manual slide valves and a control panel for every transfer.
• Reversible pumping: fill or empty with the same setup.
• Spills: open hose ends lose liquid and leave slurry or digestate puddles. The host can switch spills off.
• Coupler info: look at a coupler to see which liquids it accepts and supplies.
• Open for modders: add Fluid System support to your own vehicles and placeables with a few lines of XML.

Included equipment

• 8-inch suction hoses, 3 m and 5 m
• Suction hose with steel intake (1 + 2 m)
• PTO rotary-lobe pump
• PTO rotary-lobe pump with swivel elbows
• Wienhoff docking station
• Slurry storage connection with manual slide valve

V1.2.0.0

• Redesigned graphical tank overview with source, destination, flow rate and pump controls.
• Operate both tanks’ manual and powered valves directly from the overview.
• Separate controls for configured front-arm pumps. Starting a booster also starts its assigned main pump.
• Step-by-step connection setup with a review page and 3D placement. Settings are preserved when switching connection types.
• Clearer German and English labels, help text and navigation.
• The 8-inch storage connection now supports water, slurry and digestate.
• Pump warnings no longer appear while driving unrelated vehicles.
• Clearer pump and connection messages without blocking dialog windows.
• Improved front-arm-to-tanker binding through the tractor. The connection section only shows the relevant valves.
• Improved hotkey controls for operation without opening the menu. Available actions are shown in the F1 help menu.
• New side HUD overview for tanks and pumps, which can be enabled or disabled in the settings.

V1.1.1.0

• Added Vredo integrations and corrected connection positions.
• Fixed Lua errors and outdated fluid selections.
• Simplified pump overview and expanded debug display, including in the shop.
• Select storage targets with Tab, range 50 – 100 m.
• New XML option hoserot enables hose rotation.