Field Sprayer Cleaning System V1.0.0.0

This mod requires you to clean your sprayer after use unless you want to use the same product again. Changing products requires time, and the mod should work with every sprayer, although not all have been tested.

The only difference between Semi-Realistic and Realistic is the time required. The steps remain the same. Everything worked perfectly in the tests, and any errors can be reported for adjustment.

Features

• Cleaning required:
  After use and emptying, the sprayer remains dirty. The same product can continue to be used, but changing products requires cleaning.
• Preparation:
  Completely empty the spraying agent. To rinse, start the engine and fully unfold the boom.
• Filling with water:
  Press R at a suitable water source. Each cycle requires 15% of the tank capacity, and filling stops automatically.
• Cleaner:
  In the shop, you can purchase 2,000-litre cleaner IBCs for €10,000 and place them next to the sprayer.
  There are three cycles: fresh water first, then water with cleaner, and finally fresh water again.
• Cleaning:
  CTRL + ALT + P starts or pauses the process. Each cycle must be filled and started manually. There is no automatic start of the next cycle.
• Select mode:
  Use the options or CTRL + ALT + M.
  Realistic: 7 minutes of circulation + 8 minutes of emptying per cycle, followed by spraying out.
  Semi-realistic: 20 seconds of circulation + 30 seconds of emptying per cycle.
• Quick drain and testing:
  CTRL + ALT + L drains the water quickly without cleaning.
• Display and controls:
  The spraying overlay shows progress, times, water and cleaner. When the mouse cursor is active, it can be moved and resized.
  Keys can be changed in the controls menu.