A complete car wash for vehicles and machines. Drive in and press start to begin the wash.
Features
- Conveyor belt with guide rail that pulls the vehicle through automatically
- Foam arch, roof and side brushes that adapt to the shape of the vehicle, plus rinse and fan drying
- Roller gate that opens and closes automatically
- Card terminal with start/stop and a display showing how long the wash takes
- If the program is restarted, the vehicle is pulled back to the start automatically and washed again
- Vehicles actually get clean, with dirt removed while washing
Specifications
- Purchase price: 120,000
- Upkeep: 120 per day
- Building size: width 5.4 m inside, height approx. 6.9 m
- Space needed, concrete slab with ramps: 8 m wide x 62 m long
- Maximum vehicle size: width 4.66 m, including mirrors and header, height 5.35 m above the belt, length 22 m, combinations included
- Multiplayer: tested on a server, but not yet with several players at once
- PC/Mac only, no console
Version 1.3.2.0
Redistributing the mod, or removing or reusing its assets without permission, is not allowed.
V1.4.0.0
- NEW
AutoDrive support: AD vehicles stop at the AD destination on the lane, get washed and continue on their own, also to the parking spot if set in AD.
New key “AD: Drive to car wash”, default: Ctrl + W. The vehicle drives to the AD destination at the car wash automatically. The name of the destination does not matter. The key can be changed in the controls settings.
Combinations up to 30 m long can now be washed, was 22 m. The building is unchanged, long combinations stick out at the front and back.
Map icon, category “Other”. Clicking it teleports you to the terminal.
Flexible spiral cables on the wash brushes, top and side, and on the dryer. They move with the lifting and lowering.
New junction boxes on the side brushes, turned toward the tower, with a cable from the tower to the box. - IMPROVED
Dryer: silver rails with the new shape from the wash portals, more modern junction boxes and conduits to the fans.
Cable mounts at the top of the portals and the dryer redesigned.
Foam arch: pipes held by clamps like on the water arch, new brackets, supports without gaps, protruding parts removed.
Lift drive motors removed, they no longer had a function. - FIXED
Dryer towers and posts had no collision. They are solid now.
Flickering on the side brush carriages. - RECOMMENDATION FOR AUTODRIVE
Place the AD destination, the holding point, exactly at the entrance at the roller door, a little further inside the car wash, but not in front of the roller door. The vehicle stops there and the wash starts reliably.
