This is the beta version of the Vac-Con Vacuum AR Body for FS25. It is a bed, not a truck, with changes made for FS25.
Trucks pretested to fit this attachment: These should work, last I checked; if not, a hotfix is dropped. If you know an AR body truck that this could work with, let me know.
Required Mods:
- fs25 paccar pack by jacksepticraft
- Interactive control
Store Items
- Vac-Con Vacuum Body
- Short Nozzle, Long Nozzle, Long Nozzle with Teeth
- Vac-Con radio remote (hand tool)
Features
- The boom swings, raises, and telescopes, and the suction hose hangs from the boom tip.
- With the vacuum on, the hose end picks up dirt and liquids; hung in a pond or river, it refills the tank with water. Turning on the vacuum raises the truck’s engine RPM.
- The pressure-washer lance is taken from the hose reel. It sprays mud, uses water from the body’s own water tank, filled at water stations, and, with TerraFarm installed, digs soft ground where the jet hits.
- The nozzles attach to the end of the suction hose with the remote’s attach key.
- Unloading: the tank tips and the rear door opens, or the tank empties through the rear hose.
- Pipe rack on the rear door with switchable rack blocks and lockable clamps that hold the pipes while driving; the rack moves with the door.
- LED or classic arrow board, side safety strobes with several patterns, spotlights, boom and rear work lights.
- US-style rear end: round stop/tail/turn and reverse lamps, ID and clearance lamps, ICC bumper, mud flaps.
- Storage cabinets, a control cabinet, and a remote cabinet with opening doors.
- Shop options: paint and trim colors, logos, white, color, or none, reel hose and reel frame colors, arrow board type.
Controls
- Boom: the crane controls when the body is selected, swing, raise / lower, telescope; hose reel on the crane tool axis.
- Vacuum on/off: turn-on key, PTO button in the control cabinet, or remote.
- Unloading: tip key; tip-side key switches between the rear door and the rear hose.
- Remote, within 50 m of the body:
- left stick: boom swing and boom up / down
- right stick: telescope and hose reel
- toggles: vacuum, unload, unload side, beacons/strobes, front reel swing
- attach key: connect the nearest loose nozzle to the suction hose, or take it off
- G: take the remote out of its cabinet or put it back, within 3 m of the cabinet
- The screen shows link distance, vacuum state, tank level, and unload side.
- Water Lance: take and return it to the hose reel with the hand-tool key; spray with the hand-tool action key. The lance can also be used to wash trucks.
- Interactive Control points, needs
FS25_interactiveControl: cabinet doors, PTO, strobe pattern, spotlights, left, right, boom, rear, all, arrow board modes, rack blocks, top/middle/bottom pipe clamps and the hose reel swing.
