





Tramline Pilot plans tramlines for every field, marks them in the field and drives, turns and sprays or spreads only on them. It is based on Control Traffic Farming, stores the same tramlines for use year after year, replaces Precision Farming tramlines without requiring Precision Farming, and connects with AutoDrive to refill.
Install FS25_TramlineSystem.zip in Documents/My Games/FarmingSimulator2025/mods, then tick Tramline Pilot in the mod list when you load your savegame.
Features
- Plans tramlines for every field and prevents driving over crops.
- When refilling, the worker drives back around the tramlines to exit and re-enter the field.
- Stores tramlines for use year after year.
- Connects with AutoDrive to refill.
- Worker turns can follow the headland tramline or use loops where they fit.
- Headland corners can be round or use backing into corners for self-propelled and mounted sprayers.
- Can spray the headland first, last or skip it.
- Can create tramlines in the crop as wheel tracks or a full lane.
- Can show lines for this field, all fields or no fields.
- Precision Farming tramlines can be on, off on tramline fields, or off everywhere.
- White lines are the main tramlines; amber lines are the headland tramlines.
- A green line shows where the worker sprays next; blue shows where it drives with the boom off.
- A green flag marks where the course starts and a chequered flag marks where it finishes.
- Last sprayed here marks where an unfinished job stopped.
- Field gate marks where AutoDrive takes over for a refill.
- With Back into corners, the sprayer reverses into sharp headland corners so none are missed. This does not apply to trailed sprayers.
- An unfinished job is kept when you save, so you can carry on another day.
- Saved wheelings work in every savegame on the same map.
Specifications
- Tramline spacing: your boom width or spreading width, 6-60 m.
- Headland passes: 0-4 tramlines around the field edge.
- Turn radius: your sprayer’s turning circle, 4-15 m.
- Wheel track width: the distance between your sprayer’s wheel centres, 1.50-4.00 m. The width of the machine you are sitting in is marked “your vehicle”. 2m is a good start.
- Work speed and Turn speed: for spraying and turns.
- Create tramlines in crop: no, wheel tracks or a full lane.
- Wheel tracks: two tracks 2 m apart.
- Full lane: 3 m.
- Soil strip: 6-30 m.
Setup
- Stand on the field and press Right Ctrl+M.
- Set Tramline spacing to your boom width or spreading width.
- Pick a Direction and the number of Headland passes.
- Press Enter to generate the tramlines.
- Fill your sprayer and drive onto the amber headland tramline.
- When the green Start here flag shows, press Alt+T.
- Press Alt+T or Alt+Q to stop.
Setting up a field:
- Direction: longest edge, vehicle heading, A – B points, Alt+1 and Alt+2, an angle, or as stored.
- Buttons: Enter generates, Space opens Saved wheelings, Clear field deletes the layout, and Esc goes back.
Seeing your tramlines
- Press Alt+4 to show or hide the lines.
- White lines are the main tramlines; amber lines are the headland tramlines.
- A green line shows where the worker sprays next; blue shows where it drives with the boom off.
- A green flag marks where the course starts and a chequered flag marks where it finishes.
- Last sprayed here marks where an unfinished job stopped.
- Field gate marks where AutoDrive takes over for a refill.
Spraying with the AI worker
- Drive onto a tramline: the headland tramline for a new job, or a main tramline to start from there.
- Press Alt+T. The worker sprays the field and never leaves the tramlines.
- Press Alt+T or Alt+Q to stop. Alt+Q also works from outside the vehicle.
- To carry on, press Alt+T again. On the spot where it stopped, it carries on. Anywhere else, choose Drive back there, Carry on from here or New job.
Refilling with AutoDrive
Set it up once per field:
- In AutoDrive, put a marker at the field edge: the field gate.
- Set that marker as the sprayer’s AutoDrive target.
- Set your refill point as the sprayer’s 2nd target.
- In the menu, set Refill with AutoDrive to On.
When the tank runs empty:
- The worker folds up and drives on the tramlines to the gate.
- AutoDrive takes it to refill and brings it back.
- The worker drives back to where it ran out and carries on.
If AutoDrive is stopped on the way, start AutoDrive again or press Alt+T on the field.
Saved wheelings
- Every layout is saved when you press Generate.
- Next season, open the menu on the field and press Space, Saved wheelings.
- Pick the one you want, then press Generate.
Tramlines in the crop and Precision Farming
- Create tramlines in crop: choose Wheel tracks, two tracks 2 m apart, or Full lane, 3 m, then press Generate. The crop is removed along the tramlines straight away.
- Precision Farming tramlines: choose Off on tramline fields or Off everywhere, so Precision Farming’s seeders don’t make their own tramlines.
Keys
- Right Ctrl+M: setup menu
- Alt+T: start or stop the worker
- Alt+Q: stop the worker
- Alt+4: show or hide the lines
- Alt+1 / Alt+2: set points A and B
- Handy console commands:
tlNewJobforgets an unfinished job,tlRefillrefills now,tlPaintcreates the tramlines in the crop, andtlWheelings/tlLoad/tlSavehandle saved wheelings.
If something goes wrong
- “Drive onto the headland tramline”: you are not on a tramline; drive to the amber marker.
- It won’t back into corners: it needs a self-propelled or mounted sprayer, a headland pass and Back into corners.
- Refill doesn’t start: check the AutoDrive target is a marker at the field edge and the 2nd target is the refill point.
- The unfinished job has gone: it is dropped when you generate a different layout.
- No lines: press Alt+4.
- It can’t follow the corners: set Turn radius to your sprayer’s turning circle.
- Gaps in the wheel tracks: press Generate again with Create tramlines in crop set to Wheel tracks.
Issues:
Changelog
- V1.2.0.2
New since 1.1.0.0: new feature for crops grown to the end of the field, potatoes and onions. Set Headland to Soil strip, 6-30 m, for a field with no headland tramline. The tramlines stop at the strip. The worker sprays until the whole boom is off the crop, folds, turns round on the bare soil, with a three-point turn where it is tight, unfolds in the next tramline and backs out onto the strip to spray from the very end.The soil strip turns are worked out for your machine: its length, where its boom is and whether it can back up. Trailed sprayers turn forwards only, so they need a wider strip.
Create tramlines in crop also clears the crop on the soil strip.
Joined fields: fields you have joined by ploughing or cultivating the land between them count as one field, with one headland round all of it. This works on land your farm owns.
Fixes: Work speed and turn speed are now kept for each field. Before, setting them on one field set them for every field, GitHub issue #2. The headland no longer crosses itself or splits into loops on fields with stepped or jagged edges, such as maps that paint field ground in 2 m squares. This also fixes the headland breaking at some tramline spacings, GitHub issue #2. The headland no longer splits in two around a strip where a hedge or wall between two old fields was taken out. Strips up to about 8 m wide are planned straight over when nothing stands in them. On a field with no headland tramline, a worker started in the first tramline now sets off from there.
Other: AutoDrive refills need a headland tramline, so they are off on soil strip fields. Version number now 1.2.0.2. Full notes for each version in
CHANGELOG.mdon GitHub. - V1.1.0.0
New: Headland direction, a new option in the setup menu, needs at least one headland pass. Choose As the vehicle faces, Clockwise or Anticlockwise. With Clockwise or Anticlockwise, the worker always goes round the headland that way. It turns off the headland into the tramlines, and back onto the headland at the end, with one curve each instead of two. The tramlines are still done up and down, turning one way at one end and the other way at the other end. With Back into corners, the worker backs into each corner from the same side, so each corner needs one corner tramline instead of two. Facing the wrong way, the worker won’t set off: the start marker shows “Turn round” and which way the field goes. Saved wheelings remember the direction.Fixes: Tramlines made in the crop no longer turn into another crop. On maps with extra crops they showed as the last crop in the list, onion, for example, on the crop map, GitHub issue #1.
Other: Version number now 1.1.0.0. Changelog, README and tutorial on GitHub updated for the headland direction.
- V1.0.0.1
Fixed: Stopping course
Added: user logging





