Precision guidance, section control and field records for Farming Simulator 25.
A single in-cab terminal that handles straight lines, headland management, section shutoff, tramlines and records of what happened on every field.
Features
- Guidance: Set an AB line by driving it, or let ApexGuidance read one straight off a recorded field edge and offset it into the crop by however much you choose. Tracks are numbered, snap to the nearest automatically, and can be nudged sideways in tenths of a metre without losing the grid.
- Boundaries and obstacles: Drive the field edge once and it is recorded, saved and reused. Record ponds, pylons and tree islands the same way. Each gets its own headland ring at your headland width, the implement lifts and lowers around them exactly as it does at the field edge, and in guidance mode there are proper passes to follow round them.
- Headlands: Three modes: Warn, flags the approach, nothing automatic. Auto, lifts and lowers the implement for you. Guidance, generates headland passes and steers them round the field and every obstacle, picking the nearest pass as you drive onto it. Lift and lower are set in metres from the line, before it, after it, or exactly on it, with a headland overlap setting that moves the whole joint with one number instead of four.
- Section control: Both ends of the working width are measured to the boundary every frame, so the end that reaches it first shuts off first. Progressive, stepped, and it follows curves and corners where an angle-based system cannot. Manual left and right shutoff works from the outside in. A section strip across the bottom of the terminal shows what is working and what is not, and hides itself on machines that have no sections.
- Tramlines: Automatic lane counting from the AB line, with a manual mode for headland passes where lane counting means nothing. Adjustable spacing, width and distance behind the machine.
- Auto turn: Headland turns are generated from your machine’s own geometry, with skips up to five rows. Every generated path is checked for landing on the target track before it is used. Turns you have driven yourself can be recorded, and are chosen automatically when they fit the row spacing better than a generated one.
- Records: Per field, per commodity: seed, fertiliser, lime and spray by weight and volume, yield in tonnes and input cost. Accumulates across sessions and survives reloads.
- Coverage: Worked ground is painted live and the area is counted. The paint respects the sections, so ground you shut off over is not counted as done.
- Machine profiles: Width, offsets, headland settings, tramline figures and turn preferences are saved per implement and restored when you hitch up. A geometry lock is available for machines whose automatic measurement cannot be trusted.
