FarmPilot V1.0.5.6

FS25 Mods |
FarmPilot V1.0.5.6


FarmPilot is an autonomous mod that runs the farm on its own. Tell it which field to work, with which tool and which field comes next, and FarmPilot chains it all: it fetches the tool, hitches it, drives to the field, works it, refills, comes back, parks the tool at its spot and moves on to the next field. You manage the farm, it does the work.

Features

  • Autonomous mode: a farm that works by itself.
  • From the shed to the field, without you: fetches the chosen tool, including reversing, hitching, hoses and PTO, drives to the field and starts the field’s Courseplay course at the right width.
  • Field after field: the next field and next tool are shown in the HUD. At the end of a field, the tool is parked at its spot, the tractor takes the next tool and leaves for the next field.
  • Seeders: the in-season crop and refill zone are set per field. The seeder fills up before leaving, and when empty it leaves the field, refills from pallets, big bags or silos, comes back and resumes at the last point.
  • Spreaders and sprayers: select the product, the quantity as “Full” or “Just enough”, and the refill zone. Leftovers are kept if the next field uses the same product, otherwise they are emptied into big bags or IBCs.
  • Baler: follows the track of the combine or windrower that went before.
  • Bale trailer: collects all bales, wrapped or unwrapped, drops them at the chosen zone, either sale or storage, and comes back while some are left.
  • Trailers: a farm trailer is hitched at the start and parked back at its spot at the end. The trailer is swapped at delivery.
  • Combines and forage harvesters: unloaders queue at the field edge on harvested ground, stay under the pipe while unloading and never drive into standing crop. The forage harvester is followed from behind, including headland turns.
  • Parking button: every attached tool is parked at its spot, the spreader is emptied, then the tractor parks.

Driving

  • Head-on passing: one vehicle pulls over and the other reverses, following traffic rules on tracks.
  • Drives around obstacles, posts and poles, with a forward or reverse manoeuvre when it is too tight.
  • Corners at the real radius of the combination, with adapted speed and indicators at the right distance.
  • Secondary and tertiary roads are only used when they save time.
  • Waits for tools to fold before leaving and leaves the field without driving through the crop.
  • Queues and uses the weighbridge without overtaking.

The whole former AutoDrive Addon is built in: weighbridge, indicator before turns, engine stop delay, lights with the engine off, rear implement and a per-vehicle “empty silo” timer. A truck can wait at the field edge to be filled.

Disable FS25_AutoDriveAddon if you had it.

Without Courseplay, FarmPilot is still a complete AutoDrive, with deliveries, loading and unloading combines. Autonomous mode waits or hands over to the game worker, your choice.

Changelog

  • V1.0.5.6
    • Trailer tarps: opened only on entering the field and closed on leaving it; forage harvester unloading.
    • Root harvesters, including beets and potatoes: trailers line up under the pipe and unload correctly, with a more reliable exit from the field to the next trailer.
    • Equipped combine or forage harvester alone in Autonomous mode: the header is taken from its trailer, brought to the field and stored at the end. Everything about the combine is a V1; the concept will be improved.
    • Secondary, tertiary and new “access road” types: a gear wheel chooses which vehicle types may use them; road settings are in the general settings.
    • HUD: the “Drive – <goal>” title tells what the vehicle is doing, there is no more “AD” in texts, the HUD is fixed at the bottom, the red message is on 2 lines, and there is an “Editor reminder” window.
    • Automatic tyre change with AutoSwitch: threshold per vehicle, and the vehicle goes to the workshop like for repairs.
    • Spreaders: the leftover is returned or sold, with an adapted loading point and trailer. “Collect and deliver” resumes after a partial load.
    • Driving: more accurate turns, an indicator at network intersections with a Yes/No setting, beacon lights and the Patriot 4450 ramp.
    • Complete in-game help with F1; the “Field” line resets to “none” once parked; swaths and fold on purchase.
  • V1.0.1.3

Author: bibifr

Having problems with the mod? Check the comments for possible solutions, and report any new bugs you discover.


Download


Useful Information: How to install FS25 Mods | Farming Simulator 25 FAQ | Farming Simulator 25 News | FS25 System Requirements | Download FS25 Game | Giants Editor FS25 | FS25 Modding Guide | FS25 Cheats | FS25 Guides

Leave a Reply

Your email address will not be published. Required fields are marked *