This mod forces you to clean your sprayer after use, unless you want to use the same product again. Changing products now requires some time.
The only difference between Semi-Realistic and Realistic is the time required. The steps remain the same. It should work with every sprayer, although I have not tested them all. Everything worked perfectly in my tests.
Features
- After use and emptying, the sprayer remains dirty. The same product can continue to be used; changing products requires cleaning.
- The spraying overlay shows progress, times, water and cleaner.
- When the mouse cursor is active, it can be moved and resized.
- Keys can be changed in the controls menu.
Preparation
Completely empty the spraying agent. To rinse, start the engine and fully unfold the boom.
Filling with water
Press R at a suitable water source. Each cycle requires 15% of the tank capacity; filling stops automatically.
Cleaner
In the shop, you can purchase 2,000-litre cleaner IBCs for €10,000 and place them next to the sprayer.
Three cycles: fresh water first, then water with cleaner, and finally fresh water again.
Cleaning
CTRL + ALT + P starts or pauses the process. Each cycle must be filled and started manually, there is no automatic start of the next cycle.
Select mode
Via the options or CTRL + ALT + M.
- Realistic: 7 minutes of circulation + 8 minutes of emptying per cycle, followed by spraying out.
- Semi-realistic: 20 seconds of circulation + 30 seconds of emptying per cycle.
Quick drain and testing
CTRL + ALT + L drains the water quickly without cleaning.
Changelog
- V1.0.0.1
Fendt Xylon adjustment.
