Smart Pallet Autoload V1.0.0.0

Mod for Farming Simulator 25, PC only, script mod. Multiplayer supported.

Version 1.0.0.0 adds support for bales.

Features

• Smart layout: several patterns are compared, lengthwise, crosswise and tail row, and the one that carries the most with a tidy look is used. Rows are centred and line up with the trailer’s tension belts.
• Real stacking: the second layer is measured in the game, so taller or shorter pallets rest exactly on the ones below.
• Pallets from different productions with the same footprint can share one load.
• Large pallets, including barrels, vegetable crates, stone, saplings, planks, wood beams and prefab walls, load too.
• Round bales, 1.25, 1.50 and 1.80 m, square bales, 1.80, 2.20 and 2.40 m, and small square bales are supported. Round bales lie across the deck in a pyramid, with the upper layer in the grooves, like a real bale load. Every bale type fills the deck edge to edge without going through the walls, stays firmly in place while driving, and its weight goes to the trailer.
• Your own vehicles: any vehicle, base game or mod, can get the autoload through modSettings/FS25_smartPalletAutoload/userPresets.xml, without editing any zip. The console command spaPrintPreset writes a ready entry for the current vehicle and its trailers to the log. A commented example, VEHICLE_XML_EXAMPLE.xml, is inside the mod.
• Tension belts are fastened automatically when loading ends, only where there is cargo.
• Cargo stays in place while driving. Selling points and productions take pallets straight from the trailer.
• Unload left, right, rear or in place, with a ground preview. The unload point can be moved sideways, forward/back and up/down, including for docks and platforms.
• AutoDrive support: loads at the pick-up point, reports when full and unloads at the destination.

Supported vehicles

• KRONE Trailer Profi Liner, 52 Euro pallets
• Farmtech DPW 1800, Kröger PWO 24, Fliegl DTS 5.9 and Schwarzmüller Low Loader 4A
• Brandt H550 Beavertail, Demco Steel Drop Deck and LODE KING Renown Drop Deck
• International CV Series, flatbed and box van
• Bale trailer bodies: Brantner DD 24073/2 XXL, Farmtech DDK 2400, Farmtech EDK 650, Salek ANS-1900, Stema Trius and Lizard Dragon
• Any other trailer with tension belts across a flat deck, base game, DLC or mods, gets an automatic setup.
• Any other vehicle can be added with userPresets.xml.

Hotkeys

• Left Alt + B: enable / disable the autoload on this vehicle
• B: start / stop loading
• Left Alt + O: change cargo type
• O: unload preview / change unload side
• Right Ctrl + W/A/S/D: move the unload point
• Right Ctrl + E/Q: raise / lower the unload point
• Right Ctrl + R: reset the unload point
• I: unload
• U: show load areas

Bales are fixed on the deck while loaded. To take a single bale off with a bale grab or front loader, unload first with I.

To report a bug, leave a comment with a description and your log.txt file, located at Documents/My Games/FarmingSimulator2025/log.txt.

Changelog

• V1.0.0.0
  • Bales: round, square and small square bales on all supported trailers
  • Own vehicles via userPresets.xml and console command spaPrintPreset
  • Guide is now VEHICLE_XML_EXAMPLE.xml